This cable provides a USB to RS232 port complete with a male DB9 connector. This can be used to provide a second serial port when the SCADA RS232 port on the relay is already in use with other communications equipment.

The MOD-0003 is an industrial GSM modem to provide fast, reliable connection for RC10 communications requirements.

3G Dual Sim Ethernet Modem

The RS485 isolator is used with the RS485 cable to provide up to 3.5kV of opto-isolation for incoming cables. A rapid Transient Voltage Suppressor inhibits lightning and electrostatic discharge surges to 1kV.

This adaptor is used to provide an Ethernet port in the RC10 cubicle. It is powered from the USB port on the relay and has a standard RJ45 socket. The Ethernet port supports 10/100Mbit network speeds.

This adaptor is used to provide 802.11b/g wireless Ethernet connections to the RC10 cubicle.

Up to two Input Output (IO) modules can be supplied with the RC cubicle as an option. Each I/O module has eight opto–coupled inputs and eight voltage free contact outputs with normally open and normally closed contacts.

The RC10 Rack Mounted Test Set has been custom designed to assist engineers with bench testing of reclosers in protection and SCADA systems.

The interface test set provides an interface for secondary injection from Power System Simulators.

OMB-17 and OMB-18 Combined Pole Mounting Brackets are used to mount both the VT and OSM15, OSM27 or OSM38 reclosers to both wooden and concrete poles.

Pole mounted outdoor voltage transformer complete with mounting bracket and accessories.

Two hole cable palms with NEMA spacing. The cable palms are supplied with two (2) M12x25mm stainless steel bolts together with flat and spring washers.